Authentic designer vinyl art figures and sealed blind box editions engineered for collectors.

Kidrobot supplies authenticated limited edition art figures, rotocast designer vinyl toys, mystery blind box collectibles, and pop culture vinyl figures directly from 74 Leonard St in New York. Every batch allocation is inspected for mold seam calibration, genuine licensor provenance, and tamper-evident factory packaging.

Non-Binding Acquisition Rates • Showroom Basis 9.99–27.99 USD per limited art figure or designer vinyl unit Blind boxes: 9.99–14.99 USD • Pop-culture collectibles: 9.99–61.98 USD
Founder • Heritage Paul Budnitz, founder, active in New York since 2002
Standard Scales 3-inch and 4-inch scales, 2-piece sets, 20-unit master cartons
Commercial Model Inquiry-only allocation desk. No cart, no retail payment processor
Kidrobot limited edition designer vinyl art figure on dark concrete display ground
Rotocast Vinyl 4" Specification
Master carton holding sealed mystery blind boxes with collector packaging graphics
Intact mystery carton allocations with verified tamper-evident factory seals.

Standard 20-unit master cartons preserve authentic chase drop ratios across complete artist series runs. Every blind box collectible stays wrapped in opaque foil until the collector unboxes it, preventing secondary sorting or weight tampering. Unit allocation benchmarks range from 9.99 to 14.99 USD depending on artist series licensing and carton volume.

Format: Opaque mystery packaging Lot Size: 20 units per master carton Rate Basis: 9.99–14.99 USD per unit
Rotational molding thermal curing oven and multi-axis mold armature in casting shop
Rotocast vinyl fabrication with sub-millimeter seam calibration.

Steel and electroplated copper tooling sustains rotational heat cycles that yield uniform wall thickness and structural stability across every figure. Seam joints undergo mechanical trimming to maintain edge tolerances under half a millimeter before multi-pass pad printing. We fabricate exclusively from industrial-grade vinyl and high-density ABS plastic without brittle calcium fillers.

Tooling: Split rotational casting molds Materials: Rotocast vinyl and high-density ABS plastic Seam Tolerance: Under 0.5 mm

Rotocast inspection choreography from molten vinyl to sealed foil dispatch.

Our fabrication and allocation pipeline follows a disciplined five-stage verification cycle before any case leaves Leonard Street. Trace the scroll-drawn path below to review each inspection checkpoint.

Mold Pour Rotocast Spin Seam Trim Pad Print Foil Seal

Mold Specification

Polyvinyl chloride compound heated and measured into two-part electroplated tooling. Wall balance calculated for drop resistance.

Rotocast Thermal Spin

Bi-axial rotational ovens distribute cured vinyl symmetrically across all limbs, preventing hollow spots and structural deformation.

Seam Alignment & Deburr

Joint boundaries hand-trimmed with surgical blades. Tolerance checked under 0.5 mm dial calipers prior to solvent prep.

Multi-Pass Pad Print & Seal

High-viscosity pigments stamped across curved silhouettes. Foil wrapping and serialised collector carton packing with intact ratios.

Geometric designer vinyl toy profile with clean parted mold lines under amber rim light

Physical permanence over disposable collectibles.

Founded in New York in 2002 by Paul Budnitz, Kidrobot established designer vinyl toys as serious sculptural art. We reject lightweight resin copies and opened blind box arbitrage. Every figure maintains authentic artist provenance and registered New York origin.

Inquire Allocation

Transparent unit price ranges and allocation drivers.

Every allocation quote is calculated from five physical parameters: release series tier, artist or property license, physical height scale (3-inch vs 4-inch), packaging format (mystery blind box vs open-window collector packaging), and order lot volume (single unit vs paired 2-piece set vs 20-unit master carton). Quotes are inquiry-only benchmarks.

Limited Art Figure

9.99–27.99 USD
Per individual sculpted unit

Numbered artist editions, rotocast vinyl with multi-layer pad print finishes. Packaged in archival collector boxes with custom foam inserts.

Scale: 4" mid-scale sculpt
Format: Archival window box
Lot Option: 1 unit or 20-pc case
Inquire Art Figure

Designer Vinyl Toy

9.99–27.99 USD
Per figure or paired set unit

Classic urban vinyl platforms. Available as single 3-inch figures, 4-inch solo releases, or paired 2-piece collector blister sets.

Scale: 3" or 4" vinyl
Format: Blister or window
Lot Option: Single, 2-pc set
Inquire Vinyl Toy

Blind Box Collectible

9.99–14.99 USD
Per sealed mystery unit

Foil-sealed opaque boxes with intact mystery ratios. Sold individually or in full 20-unit master cartons with guaranteed chase figures.

Scale: 3" standard miniature
Format: Opaque foil sealed
Lot Option: 20-unit master carton
Inquire Blind Box

Pop-Culture Collectible

9.99–61.98 USD
Per licensed collector unit

Officially licensed entertainment properties. Includes holographic authentication seals, specialized accessories, and collector packaging.

Scale: 3", 4", or deluxe
Format: Display window case
Lot Option: Single or carton lot
Inquire Pop-Culture

Calculate Packaging Fit, Carton Multipliers, and USD Estimate

Formula Verified

Select your required edition format, figure scale, and carton quantity below. This calculation applies format baseline rates (9.99 to 61.98 USD), scale factors (3" at 1.0×, 4" at 1.4×, 2-pc sets at 1.9×), and carton volume discounts (20-unit master cartons receive 0.85× lot tier rates).

20 units
Estimated Non-Binding Allocation Band
$187.35 – $228.98 USD
Blind Box Mystery Packaging (3" Standard Miniature Scale). 20 units. Packaging: 1 master carton (20 units/case) with intact case ratios. Est. rate: $9.37 – $11.45/unit.
Configured SKU: KR-BLIND_BOX-3-U20
Estimated Unit Rate: $9.37 – $11.45 / unit
Packaging Protocol: 1 master carton (20 units/case)
Formula: units × base_price (9.99–61.98 USD) × scale_factor × carton_multiplier ± 10%. Figures reflect non-binding showroom allocation rates; final allocation confirmed upon series inventory check.

Verified New York provenance and operator credentials.

Founded by Paul Budnitz in 2002, Kidrobot maintains active business registration in New York. We operate exclusively through direct showroom consultations and formal allocation inquiries from 74 Leonard St, New York, New York 10013.

Paul Budnitz, Founder

Active in New York since 2002 pioneering artist vinyl toys. Credited with establishing the designer vinyl toy movement across North America.

New York Registration

Active commercial registration on file in New York State. Operational address at 74 Leonard St, New York, New York 10013.

Leonard Street Archive

Direct showroom consultations by appointment. Call 212-255-8066 or submit specifications for series batch verification.

Tamper-Sealed Packaging

Factory foil wraps and master carton seals remain intact. We reject opened-box secondary arbitrage and unverified third-party drops.

Clear operational terms and collector criteria.

We are transparent about who our allocation desk serves and what our showroom will not do. Review these operational principles before submitting your requirements.

Inquiry-Only Allocation

This site is an inquiry-only acquisition desk. There is no instant checkout cart, no online payment gateway, and no binding automatic transaction. Every acquisition is verified against physical showroom inventory before invoicing.

Who This Is Not For

We do not supply secondary flippers seeking opened blind boxes, unverified drop-shippers, or mass retail discount outlets. Inquiries requesting pre-weighed foil packs or opened chase guarantees will be declined immediately.

Advertising Transparency

We run direct paid advertising campaigns across Google Ads, Microsoft Advertising, and Meta Ads. Click tracking identifiers (Google gclid, Microsoft msclkid, Meta fbclid) operate under strict Consent Mode v2 gating.

Authenticity Assurance

All items ship directly from inspected batches. If any rotocast joint or factory seal displays manufacturing defects, our Leonard Street showroom provides batch verification or return replacement under our allocation terms.

Submit Series Allocation Inquiry

Inquiry Only • Non-Binding

Specify your desired artist series, packaging format (blind box or open figure), figure scale (3-inch or 4-inch), and lot volume (single unit or 20-piece master carton). Our New York showroom desk evaluates allocations and replies with availability within one business day.

Desk Phone: 212-255-8066 • [email protected]